SheevaPlug

４週間待ちのSheevaPlugが届いた。digital西行庵blog"SheevaPlug"

Marvell>> version

U-Boot 1.1.4 (Mar 19 2009 - 16:06:59) Marvell version: 3.4.16
Marvell>> printenv
baudrate=115200
loads_echo=0
rootpath=/mnt/ARM_FS/
netmask=255.255.0.0
console=console=ttyS0,115200
CASset=min
MALLOC_len=1
ethprime=egiga0
bootargs_root=root=/dev/mtdblock2 ro
ethmtu=1500
usb0Mode=host
nandEcc=1bit
ethact=egiga0
serverip=10.10.0.2
ipaddr=10.10.0.1
cesvcid=ULULULULULULPPULULULULULDA
bootargs_end=:::DB88FXX81:eth0:none
image_name=uImage
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;
mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
yuk_ethaddr=00:00:00:EE:51:81
netretry=no
rcvrip=169.254.100.100
loadaddr=0x02000000
autoload=no
ethaddr=00:50:43:01:CA:BB
run_diag=no
bootargs=console=ttyS0,115200 mtdparts=nand_mtd:0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs) rw root=/dev/mtdblock1 rw ip=10.4.50.4:10.4.50.5:10.4.50.5:255.255.255.0:DB88FXX81:eth0:none
bootcmd=nand read.e 0x800000 0x100000 0x400000; bootm 0x800000
stdin=serial
stdout=serial
stderr=serial
mainlineLinux=no
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
netbsd_en=no
vxworks_en=no
bootdelay=3
disaMvPnp=no
enaAutoRecovery=yes

Environment size: 1304/131068 bytes
Marvell>>

WindowsXP上のTeraTermで動かしてみる

SheevaPlug_Host_SWsupportPackageWindowsHost1.2.zipをダウンロード、解凍。

電源を投入したSheevaPlugをUSB接続する

ウイザードに従ってドライバをインストール。

COM10に割り当てられたようだ。

シリアルポート設定

ポート：        COM10
ボー・レート：  115200
データ：        8bit
パリティ：      none
ストップ：      1 bit
フロー制御：    none

Ubuntu jaunty (development branch) debian ttyS0

debian login: root
Password: nosoup4u

Last login: Sat Jun 20 07:01:18 UTC 2009 on ttyS0
Linux debian 2.6.22.18 #1 Thu Mar 19 14:46:22 IST 2009 armv5tejl

The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law.

To access official Ubuntu documentation, please visit:
http://help.ubuntu.com/
root@debian:~#

おお、ログインできたね。パスワードを変えておこう。

root@debian:~# passwd
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully

ユーザを作っておこう。

root@debian:~# adduser hiroaki
Adding user `hiroaki' ...
Adding new group `hiroaki' (1000) ...
Adding new user `hiroaki' (1000) with group `hiroaki' ...
Creating home directory `/home/hiroaki' ...
Copying files from `/etc/skel' ...
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
Changing the user information for hiroaki
Enter the new value, or press ENTER for the default
        Full Name []: Hiroaki Nitobe
        Room Number []:
        Work Phone []:
        Home Phone []:
        Other []:
Is the information correct? [Y/n] y
root@debian:~#

/etc/hosts

127.0.0.1 localhost
192.168.1.222 SheevaPlug
#91.189.88.36 ports.ubuntu.com

/etc/hostname

SheevaPlug

/etc/resolv.conf

#domain marvell.com
#search marvell.com
#nameserver 127.0.0.1
nameserver 192.168.1.1

/etc/network/interfaces

auto lo
iface lo inet loopback
address 127.0.0.1
netmask 255.0.0.0

auto eth0
#iface eth0 inet dhcp
iface eth0 inet static
address 192.168.1.222
netmask 255.255.255.0
broadcast 192.168.1.255
gateway 192.168.1.1
# /usr/share/doc/ifupdown/examples for more information.

/etc/rc/local

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
#insmod /boot/fat.ko
#insmod /boot/vfat.ko
mkdir -p /var/cache/apt/archives/partial
#/root/discoverd
#cd /
#./demo.sh
#date 012618002009
#hwclock -w

exit 0

root@SheevaPlug:~# /bin/sh -c 'echo 'LANG="ja_JP.UTF-8"' > /etc/default/locale'
root@SheevaPlug:~# locale-gen "ja_JP.UTF-8"
Generating locales...
  ja_JP.UTF-8... done
Generation complete.

root@SheevaPlug:~# apt-get install aptitude
   :
root@SheevaPlug:~# aptitude install gcc
   :
root@SheevaPlug:~# aptitude install make
   :
root@SheevaPlug:~# aptitude install m4
   :
root@SheevaPlug:~# aptitude install wget
   :
root@SheevaPlug:~# wget ftp://ftp.gnu.org/gnu/gmp/gmp-4.2.2.tar.gz
   :
root@SheevaPlug:~# tar zxvf gmp-4.2.2.tar.gz 
   :
root@SheevaPlug:~# cd gmp-4.2.2
root@gmp-4.2.2# ./configure 
   :
root@gmp-4.2.2# make
   :
root@gmp-4.2.2# make install
   :

いつもの<16>

nitobe@SheevaPlug:~$ cc -static -O2 -I/usr/local/include pi.c -o pi /usr/local/lib/libgmp.a
nitobe@SheevaPlug:~$ time ./pi > ./pi.txt

real    1m12.405s
user    1m11.310s
sys     0m1.090s

おお、家庭用としては、そこそこのスピードだ。んが、遅い。